I-SUZHOU SANAO ELECTRONICS CO., LTD.

Multi core cut and stripping machine Featured Image

Multi core ukusika kunye nomatshini wokuhluba

Inkcazelo emfutshane:

Umzekelo: SA-810N

I-SA-810N ngumatshini wokusika kunye nokuhlubula okuzenzekelayo kwintambo ekhuniweyo.Ukucutshungulwa koluhlu lweengcingo: 0.1-10mm² ngocingo olunye kunye ne-7.5 yedayamitha yangaphandle yentambo ekhuselweyo, Lo matshini wamkela ukutya kwevili,Vula umsebenzi wangaphakathi wokuhlubula, unokuhluba ishethi yangaphandle kunye nocingo olungundoqo ngaxeshanye. Kananjalo unokuqhawula ucingo lwe-elektroniki ngaphantsi kwe-10mm2 ukuba ucima ukuhluba okungaphakathi, lo matshini unomsebenzi wevili eliphakamisayo, ngoko ubude bokuhluba ijacket yangaphandle bunokuba yi-0-500mm, isiphelo sangasemva se-0-90mm, ubude bangaphakathi bokuhlubula buyi-0-30mm.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Ividiyo yeMveliso

Intshayelelo yeMveliso

I-SA-810N ngumatshini wokusika kunye nokuhlubula okuzenzekelayo kwintambo ekhuniweyo.

Ukucutshungulwa koluhlu lweengcingo: Idayimitha yangaphandle ingaphantsi kwe-7.5mm intambo ye-elekthronikhi kunye ne-10mm2 yocingo lwe-elektroniki, i-SA-810N yomatshini wokuhluba intambo engundoqo, inokuhluba ibhatyi yangaphandle kunye nombindi wangaphakathi ngaxeshanye, Yamkelwe Ukutyisa amavili amane kunye nomboniso wesiNgesi ukuba kulula ngakumbi ukuyisebenzisa kunemodeli yeqhosha.

Umatshini onomsebenzi wevili lokuphakamisa kabini, ivili linokunyuswa ngokuzenzekelayo ngexesha lokuhluba, ukuze kuncitshiswe ivili elukhumbeni lwangaphandle lomonakalo, nokwandisa ubude bebhatyi yangaphandle yokuhlubula ubude, Ayinakuhluba kuphela ucingo lwe-sheath, kodwa inokuhluba ucingo lwe-elektroniki, xa ukhulula ucingo lwe-elektroniki, olufana nokungafuni ukuphakamisa umsebenzi wevili, unokucofa isikrini.

Inzuzo

1. Isikrini soMbala wesiNgesi: Kulula ukusebenza , Ukumisela ngokuthe ngqo ubude bokusika kunye nobude bokuhlutha.
2. Isantya esiphezulu: iintambo ezimbini zicutshungulwe ngaxeshanye;Iphuculwe kakhulu isantya sokukhulula kwaye igcine iindleko zabasebenzi.
3. Imoto: I-Copper core stepper motor echanekileyo ephezulu, ingxolo ephantsi kunye nobomi obude benkonzo.
4. Ukuqhuba ngamavili amane: Umatshini uxhotyiswe ngeeseti ezimbini zamavili njengomgangatho, amavili erabha kunye namavili entsimbi. Amavili erabha awanakonakalisa ucingo, kwaye amavili entsimbi ahlala ixesha elide

Iiparamitha zeMveliso

Umzekelo	SA-810N (ivili lokutyisa)
Igama lemveliso	Multi core ukusika kunye nomatshini wokuhluba
ucingo lwe-elektroniki/ ucingo olunye	0.1-10mm2
Intambo egqunyiweyo	Idayamitha yangaphandle ingaphantsi kwe-7.5mm
Ubude bebhatyi yangaphandle	Isiphelo sangaphambili 0-500mm Ngasemva Isiphelo 0-90mm
Ubude bokuhluba Undoqo wangaphakathi	0-30MM
Umjelo	4/5/6/8
Ukunikezwa Amandla	220V~50-60Hz (110V inokwenziwa ngokwezifiso)
Iphepha lokusebenza	I-4.3-intshi yesikrini sokuchukumisa isikrini
Umthamo	Malunga ne-1300 Pcs / iyure (kuxhomekeke kubude bokusika)
Ukusika ukunyamezela	0.002*L-MM( Akukho mpazamo ngaphakathi kwe-1M)
Ubungakanani	L460mmW480mmH330mm (ngaphandle kweeprotrusions
Ubunzima	35kg